View UPA1802_128883.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
MOS FIELD EFFECT TRANSISTOR
PA1802
N-CHANNEL MOS FIELD EFFECT TRANSISTOR FOR SWITCHING
DESCRIPTION
The PA1802 is a switching device which can be driven directly by a 2.5-V power source. The PA1802 features a low on-state resistance and excellent switching characteristics, and is suitable for applications such as power switch of portable machine and so on.
8
PACKAGE DRAWING (Unit : mm)
5 1, 5, 8 : Drain 2, 3, 6, 7: Source 4 : Gate
1.2 MAX. 1.00.05 0.25 3 +5 -3 0.10.05 0.5 0.6 +0.15 -0.1
FEATURES
* Can be driven by a 2.5-V power source * Low on-state resistance RDS(on)1 = 23 m MAX. (VGS = 4.5 V, ID = 3.5 A) RDS(on)2 = 25 m MAX. (VGS = 4.0 V, ID = 3.5 A) RDS(on)3 = 32 m MAX. (VGS = 2.5 V, ID = 3.5 A)
1 4
0.145 0.055
3.15 0.15 3.0 0.1
6.4 0.2 4.4 0.1 1.0 0.2
ORDERING INFORMATION
PART NUMBER PACKAGE Power TSSOP8
0.65 0.27 +0.03 -0.08 0.8 MAX.
PA1802GR-9JG
0.1
0.10 M
ABSOLUTE MAXIMUM RATINGS (TA = 25C)
Drain to Source Voltage Gate to Source Voltage Drain Current (DC) Drain Current (pulse)
Note1 Note2
EQUIVALENT CIRCUIT
20 12 7.0 28 2.0 150 -55 to +150 V V A A W C C
Gate Protection Diode Source Gate Drain
VDSS VGSS ID(DC) ID(pulse) PT Tch Tstg
Body Diode
Total Power Dissipation Channel Temperature Storage Temperature
Notes 1. PW 10 s, Duty Cycle 1 % 2 2. Mounted on ceramic substrate of 5000 mm x 1.1 mm Remark The diode connected between the gate and source of the transistor serves as a protector against ESD. When this device actually used, an additional protection circuit is externally required if a voltage exceeding the rated voltage may be applied to this device.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. D12966EJ1V0DS00 (1st edition) Date Published January 2000 NS CP(K) Printed in Japan
The mark * shows major revised points.
(c)
1997, 2000
PA1802
ELECTRICAL CHARACTERISTICS (TA = 25 C)
CHARACTERISTICS Zero Gate Voltage Drain Current Gate Leakage Current Gate Cut-off Voltage SYMBOL IDSS IGSS VGS(off) | yfs | RDS(on)1 RDS(on)2 RDS(on)3 Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Total Gate Charge Gate to Source Charge Gate to Drain Charge Diode Forward Voltage Ciss Coss Crss td(on) tr td(off) tf QG QGS QGD VF(S-D) TEST CONDITIONS VDS = 20 V, VGS = 0 V VGS = 12 V, VDS = 0 V VDS = 10 V, ID = 1 mA VDS = 10 V, ID = 3.5 A VGS = 4.5 V, ID = 3.5 A VGS = 4.0V, ID = 3.5 A VGS = 2.5 V, ID = 3.5 A VDS = 10 V VGS = 0 V f = 1 MHz VDD = 10 V ID = 3.5 A VGS(on) = 4.0 V RG = 10 VDS = 16 V ID = 7.0 A VGS = 4.0 V IF = 7.0 A, VGS = 0 V 0.5 5 0.8 16 16 17 21 970 510 230 60 210 590 820 13 3 5 0.74 23 25 32 MIN. TYP. MAX. 10 10 1.5 UNIT
A A
V S m m m pF pF pF ns ns ns ns nC nC nC V
* *
Forward Transfer Admittance Drain to Source On-state Resistance
TEST CIRCUIT 1 SWITCHING TIME
TEST CIRCUIT 2 GATE CHARGE
D.U.T.
D.U.T. RL PG. RG VDD ID VGS 0 = 1 s Duty Cycle 1 % ID
Wave Form
VGS VGS
Wave Form
IG = 2 mA VGS(on)
90 %
RL VDD
0
10 %
PG.
90 % 90 %
50
ID
0 10 % 10 %
td(on) ton
tr td(off) toff
tf
2
Data Sheet D12966EJ1V0DS00
PA1802
*
TYPICAL CHARACTERISTICS (TA = 25 C)
DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA 100 80
FORWARD BIAS SAFE OPERATING AREA 100
d ite ) Lim 4.5 V n) S(o RD GS = V (@
ID(pulse)
dT - Derating Factor - %
PW
=1
ID - Drain Current - A
10
ID(DC)
60
10 0m s
10 ms
ms
1
DC
40
20
0.1
TA = 25C Single Pulse Mounted on Ceramic
0
30 60 120 90 TA - Ambient Temperature - C
150
0.01 Substrate of 5000 mm 0.1 1
2
x 1.1 mm
10
100
VDS - Drain to Source Voltage - V
DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE 30 Pulsed 25 VGS = 4.5 V
1 10
FORWARD TRANSFER CHARACTERISTICS VDS = 10 V
ID - Drain Current - A
20 15 10 5 2.5 V
ID - Drain Current - A
4.0 V
0.1 0.01 0.001 0.0001 0.00001 0 TA = 125C 75C 25C -25C
0
0.2
0.4
0.6
0.8
0.5
1
1.5
2
VDS - Drain to Source Voltage - V
VGS - Gate to Source Voltage - V
GATE TO SOURCE CUT-OFF VOLTAGE vs. CHANNEL TEMPERATURE
VGS(off) - Gate to Source Cut-off Voltage - V
1.5
VDS = 10 V ID = 1 mA
| yfs | - Forward Transfer Admittance - S
FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT 10 VDS = 10 V
1
1
TA = -25C 25C 75C 125C
0.5
0.1
0 -50
0
50
100
150
Tch - Channel Temperature - C
0.01 0.001
0.01
0.1
ID - Drain Current - A
1
10
Data Sheet D12966EJ1V0DS00
3
PA1802
RDS(on) - Drain to Source On-state Resistance - m
RDS(on) - Drain to Source On-state Resistance - m
DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT 35
VGS = 2.5 V
DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT 25
VGS = 4.0 V
30 TA = 125C 25 75C 25C -25C
TA = 125C 20 75C 15 25C -25C 10
20 15
10 0.1
1 10 ID - Drain Current - A
100
5 0.1
1 10 ID - Drain Current - A
100
RDS (on) - Drain to Source On-state Resistance - m
RDS(on) - Drain to Source On-state Resistance - m
DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT 25
VGS = 4.5 V
DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE 35 ID = 3.5 A
30 25
20
TA = 125C 75C
VGS = 2.5 V
4.0 V
20 15 10 5 -50
15
25C -25C
4.5 V
10
5 0.1
1 10 ID - Drain Current - A
100
0
50
100
150
Tch - Channel Temperature - C
RDS (on) - Drain to Source On-state Resistance - m
40
Ciss, Coss, Crss - Capacitance - pF
DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE 50 ID = 3.5 A
CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE 10000
f = 1 MHz VGS = 0 V
1000
30
Ciss Coss
20 10
100
Crss
0
5
10
15
10 0.1
1
10
100
VGS - Gate to Source Voltage - V
VDS - Drain Source Voltage - V
4
Data Sheet D12966EJ1V0DS00
PA1802
SWITCHING CHARACTERISTICS 1000
td(on), tr, td(off), tf - Swwitchig Time - ns
tf
SOURCE TO DRAIN DIODE FORWARD VOLTAGE 100
IF - Source to Drain Current - A
td(off) tr
10 1 0.1 0.01 0.001
VGS = 0 V
100
td(on)
VDD = 10 V VGS(on) = 4.0 V 10 RG = 10
0.1
1
10
100
0.0001 0.2
0.4
0.6
0.8
1
ID - Drain Current - A
VF(S-D) - Source to Drain Voltage - V
DYNAMIC INPUT CHARACTERISTICS 5 ID = 7.0 A
VGS - Gate to Source Voltage - V
4
3
VDD = 4 V 10 V 16 V
2
1
0
3
6
9
12
15
Qg - Gate Charge - nC
TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH 1000
rth(ch-A) - Transient Thermal Resistance - C/W
Mounted on ceramic substrate of 5000 mm2 x 1.1 mm Single Pulse
100
62.5C/W
10
1
0.1 0.001
0.01
0.1
1 PW - Pulse Width - s
10
100
1000
Data Sheet D12966EJ1V0DS00
5
PA1802
[MEMO]
6
Data Sheet D12966EJ1V0DS00
PA1802
[MEMO]
Data Sheet D12966EJ1V0DS00
7
PA1802
* The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. * NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. * Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. * While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. * NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance.
M7 98. 8

▲Up To Search▲

Price & Availability of UPA1802

	To Download UPA1802 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .